Home: Products > Product catalogue > Roller brushes with metal backing strip > Strip roller brush type 350
Strip roller brush type 350
The KULLEN roller brush type 350 is one of our "highlights" as it consists of a lightweight aluminium core with horizontal grooves where strip brushes are fitted in.
Two standardized aluminium cores are available:
For our brush type 350/54 with 20 horizontal grooves,
which means the brush consists of max. 20 strip brushes around the circumference.
For our brush type 350/85 with 36 horizontal grooves,
which means the brush consists of max. 36 strip brushes around the circumference.
Fill configuration:
back
back
Synthetic bristles:
- PP (Polypropylen)
- PAP (Special filament polypropylene based on PP)
- PBT (Polyester)
- PA 6.6 (Polyamide)
- PA 6.12 (Polyamide)
- KBL (Special bristle based on, very good alkaline and temperature resistance)
- HCB (Extremely heat and chemical resistant)
- PE (Polyethylene)
- CON (Electrically conductive, special filament)
back
back
back
ANDERLON abrasive filaments:
- ANS PA6 (Polyamide; embedded abrasive grit)
- ANS PA6.12 (Polyamide; embedded abrasive grit)
- ANS KBL (Anderlon, lye-steadily)
- ANS-R (Round filament with embedded silicon carbide)
- ANS-F (Anderlon-Flat bristle)
- ANA (Anderlon round filament with aluminium oxide)
- AND (Anderlon with diamond grit)
back
back
back
Wires:
- BES (Bessemer steel wire)
- PHB (Phosphor-bronze-wire (CuSn])
- MES (Brass-wire [CuZn])
- NSI (Nickel-silver-wire [CuNi])
- STD [Steel wire, natural hard]
- SUP (steel wire, tempered, straight)
- INOX (V2A stainless steel wire, acid resistant, crimped or straight)
- INOX (V4A stainless steel wire, acid resistant, crimped or straight)
- RFH (Special wire, corrosion-proof)
- TRD (Special wire, highly heat resistant)
- SSD (Steel wire)
- ASD (steel wire, tempered, extra hard and particularly tough)
- LIT (Brass-coated steel wire in cord construction)
- LTE (Brass-coated steel wire, single wire)
- AZD (Steel wire, tempered, hard and tough)
- FLA (Flat wire, tempered)
back
back
back
Synthetic bristles - PP (Polypropylen):
Polypropylene, acid resistant, straight or crimped, colours on request, dia. 0.10 mm to 1.00 mm.back
back
acid resistance at high temperatures,straight or crimped, colours on
request, dia. 0.15 mm to 1.00 mm.
back
Synthetic bristles - PAP (Special filament polypropylene based on PP):
Special filament polypropylene based which gives longer live throughacid resistance at high temperatures,straight or crimped, colours on
request, dia. 0.15 mm to 1.00 mm.
back
back
back
Synthetic bristles - PBT (Polyester):
Polyester, straight or crimped, colours on request, dia. 0.20 mm to 3.00 mm.back
back
back
Synthetic bristles - PA 6.6 (Polyamide):
All polyamid qualities have strong recovery properties. PA 6.6 is the filament with the highest rigidity in dry application before PA 6.12 and PA 6. In case of wet use PA 6.12 ranks before PA 6.6 and PA 6 because of the lowest water absorption.back
back
ranks before PA 6.6 and PA 6 because of the lowest water absorption.
back
Synthetic bristles - PA 6.12 (Polyamide):
Polyamide, straight or crimped, colours on request. Diameter 0,08 - 3,00 mm. All polyamid qualities have strong recovery properties. In case of wet use PA 6.12ranks before PA 6.6 and PA 6 because of the lowest water absorption.
back
back
back
Synthetic bristles - KBL (Special bristle based on, very good alkaline and temperature resistance):
Special bristle based on polyamide, very good alkaline resistance also at high temperatures, straight or crimped, colours on request, dia. 0.08 mm to 1.50 mm.back
back
back
Synthetic bristles - HCB (Extremely heat and chemical resistant):
Extremely heat resistant (up to max. 200 °C) and chemical resistant special straight filament, colours on request, dia. 0.20 mm to 0.60 mm.back
back
back
Synthetic bristles - PE (Polyethylene):
Polyethylene, straight or in x-cross-section, either flagged or normal, colours on request, dia. 0.80 mm to 1.00 mm.back
back
back
Synthetic bristles - CON (Electrically conductive, special filament):
electrically conductive, special filament (up to 5 x10 kOhm/cm2) based on polyamide, straight, black,temperature resistant up to 100 °C, dia. 0.13 mm and 0,25 mm. For large quantities the following bristle-dia. are available to special order: 0.21 mm, 0.41 mm, 0.52 mm and 0.64 mm.back
back
back
ANDERLON abrasive filaments - ANS PA6 (Polyamide; embedded abrasive grit):
Polyamide; embedded abrasive gritback
back
back
ANDERLON abrasive filaments - ANS PA6.12 (Polyamide; embedded abrasive grit):
PA 6.12 besitzt die beste Abriebfestigkeit und behält im Naßbetrieb durch geringe Wasseraufnahme seine gute Steifigkeitback
back
back
ANDERLON abrasive filaments - ANS KBL (Anderlon, lye-steadily):
Special bristle based on polyamide, very good alkaline resistance also at high temperatures, straight or crimped, colours on request, dia. 0.08 mm to 1.50 mm.back
back
back
ANDERLON abrasive filaments - ANS-R (Round filament with embedded silicon carbide):
Table| Grit-size | Bristle-Ø |
| K 1000 | 0.25 mm |
| K 800 | 0.25 mm |
| K 600 | 0.25 mm |
| K 600 | 0.30 mm |
| K 600 | 0.45 mm |
| K 500 | 0.25 mm |
| K 500 | 0.45 mm |
| K 320 | 0.55 mm |
| K 240 | 0.75 mm |
| K 180 | 0.90 mm |
| K 120 | 0.55 mm |
| K 120 | 1.00 mm |
| K 80 | 1.00 mm |
| K 80 | 1.27 mm |
| K 60 | 1.15 mm |
| K 60 | 1.50 mm |
| K 46 | 1.60 mm |
back
back
These flat bristles are normally used with coarse grain, eg grit 80.
We recommend to have a word with our specialists to ensure you receive the best material for your application.
back
ANDERLON abrasive filaments - ANS-F (Anderlon-Flat bristle):
A flat bristle (1.20 x 2.50 mm) and (1.14 x 2.28 mm) für that gives longer life and shorter processing time, is very stiff and contains a high percentage of abrasive grit.These flat bristles are normally used with coarse grain, eg grit 80.
We recommend to have a word with our specialists to ensure you receive the best material for your application.
back
back
back
ANDERLON abrasive filaments - ANA (Anderlon round filament with aluminium oxide):
Table| Grit-size | Bristle-Ø |
| K 1000 | 0.25 mm |
| K 800 | 0.25 mm |
| K 600 | 0.25 mm |
| K 600 | 0.30 mm |
| K 600 | 0.45 mm |
| K 500 | 0.25 mm |
| K 500 | 0.45 mm |
| K 320 | 0.55 mm |
| K 240 | 0.75 mm |
| K 180 | 0.90 mm |
| K 120 | 0.55 mm |
| K 120 | 1.00 mm |
| K 80 | 1.00 mm |
| K 80 | 1.27 mm |
| K 60 | 1.15 mm |
| K 60 | 1.50 mm |
| K 46 | 1.60 mm |
back
back
back
ANDERLON abrasive filaments - AND (Anderlon with diamond grit):
Diamond grain is aggressive towards almost everything! Due to this diamond grain the AND filament has maximum aggression and a considerable lifetime. Therefore this ANDERLON quality is especially used for the treatment of hard alloy tools.back
back
back
Wires - PHB (Phosphor-bronze-wire (CuSn]):
Phosphor-bronze-wire (CuSn), straight or crimped, dia. 0.05 mm to 0.50 mm.back
back
back
Wires - MES (Brass-wire [CuZn]):
Brass wire (CuZn), straight or crimped, dia. 0.06 mm to 0.56 mm.back
back
back
Wires - NSI (Nickel-silver-wire [CuNi]):
Nickel-silver-wire (CuNi), crimped, dia 0.06 mm to 0.25 mm.back
back
back
Wires - STD [Steel wire, natural hard]:
Steel wire, natural hard, crimped, dia. 0.06 mm to 0.80 mm.back
back
back
Wires - SUP (steel wire, tempered, straight):
steel wire, tempered, straight, dia. 0.30 mm to 1.20 mm.back
back
back
Wires - INOX (V2A stainless steel wire, acid resistant, crimped or straight):
Stainless steel wire, acid resistant, crimped or straight, material no. 1.4301/1.4310 or 1.4401/1.4571, dia. 0.08 mm to 1.00 mm.back
back
back
Wires - INOX (V4A stainless steel wire, acid resistant, crimped or straight):
Stainless steel wire, acid resistant, crimped or straight, material no. 1.4301/1.4310 or 1.4401/1.4571, dia. 0.08 mm to 1.00 mm.back
back
back
Wires - RFH (Special wire, corrosion-proof):
Special wire, corrosion-proof, resistant against process steam up to 650 °C, straight or crimped, dia. 0.30 mm to 0.50 mm.back
back
back
Wires - TRD (Special wire, highly heat resistant):
Special wire, highly heat resistant up to 1350 °C, crimped, dia. 0.30 mm to 0.50 mm.back
back
back
Wires - SSD (Steel wire):
Steel wire, natural hard, extra hard, crimped, dia. 0.12 mm to 0,25 mm.back
back
back
Wires - ASD (steel wire, tempered, extra hard and particularly tough):
Steel wire, tempered, extra hard and particularly tough, crimped, dia. 0.20 mm to 0.50 mm.back
back
back
Wires - LIT (Brass-coated steel wire in cord construction):
Brass-coated steel wire in cord construction, springy and tough, crimped, dia. 0.15 mm to 0.38 mmback
back
back
Wires - LTE (Brass-coated steel wire, single wire):
Brass-coated steel wire, single wire, springy, crimped, dia. 0.15 mm nto 0.38 mmback
back
back
Wires - AZD (Steel wire, tempered, hard and tough):
Steel wire, tempered, hard and tough, straight, dia. 0.25 mm to 0.80 mm.back
back
back
Wires - FLA (Flat wire, tempered):
Flat wire, tempered, straight, 1.10 mm x 0.25 mm to 3.30 mm x 0.75 mm (or on request)back
back
back
Natural hair - ZIE (Goat hair):
Goat hair, extremely soft, is known as a so-called ”fine hair“. KULLEN principally uses only firstclass quality.back
back
back
Strip configuration - EC2 (linear fill, low density):
straight, lightly filled with blanks for even surface treatmentback
back
back
Synthetic bristles - PP (Polypropylen):
Polypropylene, acid resistant, straight or crimped, colours on request, dia. 0.10 mm to 1.00 mm.back
back
acid resistance at high temperatures,straight or crimped, colours on
request, dia. 0.15 mm to 1.00 mm.
back
Synthetic bristles - PAP (Special filament polypropylene based on PP):
Special filament polypropylene based which gives longer live throughacid resistance at high temperatures,straight or crimped, colours on
request, dia. 0.15 mm to 1.00 mm.
back
back
back
Synthetic bristles - PBT (Polyester):
Polyester, straight or crimped, colours on request, dia. 0.20 mm to 3.00 mm.back
back
back
Synthetic bristles - PA 6.6 (Polyamide):
All polyamid qualities have strong recovery properties. PA 6.6 is the filament with the highest rigidity in dry application before PA 6.12 and PA 6. In case of wet use PA 6.12 ranks before PA 6.6 and PA 6 because of the lowest water absorption.back
back
ranks before PA 6.6 and PA 6 because of the lowest water absorption.
back
Synthetic bristles - PA 6.12 (Polyamide):
Polyamide, straight or crimped, colours on request. Diameter 0,08 - 3,00 mm. All polyamid qualities have strong recovery properties. In case of wet use PA 6.12ranks before PA 6.6 and PA 6 because of the lowest water absorption.
back
back
back
Synthetic bristles - KBL (Special bristle based on, very good alkaline and temperature resistance):
Special bristle based on polyamide, very good alkaline resistance also at high temperatures, straight or crimped, colours on request, dia. 0.08 mm to 1.50 mm.back
back
back
Synthetic bristles - HCB (Extremely heat and chemical resistant):
Extremely heat resistant (up to max. 200 °C) and chemical resistant special straight filament, colours on request, dia. 0.20 mm to 0.60 mm.back
back
back
Synthetic bristles - PE (Polyethylene):
Polyethylene, straight or in x-cross-section, either flagged or normal, colours on request, dia. 0.80 mm to 1.00 mm.back
back
back
Synthetic bristles - CON (Electrically conductive, special filament):
electrically conductive, special filament (up to 5 x10 kOhm/cm2) based on polyamide, straight, black,temperature resistant up to 100 °C, dia. 0.13 mm and 0,25 mm. For large quantities the following bristle-dia. are available to special order: 0.21 mm, 0.41 mm, 0.52 mm and 0.64 mm.back
back
back
ANDERLON abrasive filaments - ANS PA6 (Polyamide; embedded abrasive grit):
Polyamide; embedded abrasive gritback
back
back
ANDERLON abrasive filaments - ANS PA6.12 (Polyamide; embedded abrasive grit):
PA 6.12 besitzt die beste Abriebfestigkeit und behält im Naßbetrieb durch geringe Wasseraufnahme seine gute Steifigkeitback
back
back
ANDERLON abrasive filaments - ANS KBL (Anderlon, lye-steadily):
Special bristle based on polyamide, very good alkaline resistance also at high temperatures, straight or crimped, colours on request, dia. 0.08 mm to 1.50 mm.back
back
back
ANDERLON abrasive filaments - ANS-R (Round filament with embedded silicon carbide):
Table| Grit-size | Bristle-Ø |
| K 1000 | 0.25 mm |
| K 800 | 0.25 mm |
| K 600 | 0.25 mm |
| K 600 | 0.30 mm |
| K 600 | 0.45 mm |
| K 500 | 0.25 mm |
| K 500 | 0.45 mm |
| K 320 | 0.55 mm |
| K 240 | 0.75 mm |
| K 180 | 0.90 mm |
| K 120 | 0.55 mm |
| K 120 | 1.00 mm |
| K 80 | 1.00 mm |
| K 80 | 1.27 mm |
| K 60 | 1.15 mm |
| K 60 | 1.50 mm |
| K 46 | 1.60 mm |
back
back
These flat bristles are normally used with coarse grain, eg grit 80.
We recommend to have a word with our specialists to ensure you receive the best material for your application.
back
ANDERLON abrasive filaments - ANS-F (Anderlon-Flat bristle):
A flat bristle (1.20 x 2.50 mm) and (1.14 x 2.28 mm) für that gives longer life and shorter processing time, is very stiff and contains a high percentage of abrasive grit.These flat bristles are normally used with coarse grain, eg grit 80.
We recommend to have a word with our specialists to ensure you receive the best material for your application.
back
back
back
ANDERLON abrasive filaments - ANA (Anderlon round filament with aluminium oxide):
Table| Grit-size | Bristle-Ø |
| K 1000 | 0.25 mm |
| K 800 | 0.25 mm |
| K 600 | 0.25 mm |
| K 600 | 0.30 mm |
| K 600 | 0.45 mm |
| K 500 | 0.25 mm |
| K 500 | 0.45 mm |
| K 320 | 0.55 mm |
| K 240 | 0.75 mm |
| K 180 | 0.90 mm |
| K 120 | 0.55 mm |
| K 120 | 1.00 mm |
| K 80 | 1.00 mm |
| K 80 | 1.27 mm |
| K 60 | 1.15 mm |
| K 60 | 1.50 mm |
| K 46 | 1.60 mm |
back
back
back
ANDERLON abrasive filaments - AND (Anderlon with diamond grit):
Diamond grain is aggressive towards almost everything! Due to this diamond grain the AND filament has maximum aggression and a considerable lifetime. Therefore this ANDERLON quality is especially used for the treatment of hard alloy tools.back
back
back
Wires - PHB (Phosphor-bronze-wire (CuSn]):
Phosphor-bronze-wire (CuSn), straight or crimped, dia. 0.05 mm to 0.50 mm.back
back
back
Wires - MES (Brass-wire [CuZn]):
Brass wire (CuZn), straight or crimped, dia. 0.06 mm to 0.56 mm.back
back
back
Wires - NSI (Nickel-silver-wire [CuNi]):
Nickel-silver-wire (CuNi), crimped, dia 0.06 mm to 0.25 mm.back
back
back
Wires - STD [Steel wire, natural hard]:
Steel wire, natural hard, crimped, dia. 0.06 mm to 0.80 mm.back
back
back
Wires - SUP (steel wire, tempered, straight):
steel wire, tempered, straight, dia. 0.30 mm to 1.20 mm.back
back
back
Wires - INOX (V2A stainless steel wire, acid resistant, crimped or straight):
Stainless steel wire, acid resistant, crimped or straight, material no. 1.4301/1.4310 or 1.4401/1.4571, dia. 0.08 mm to 1.00 mm.back
back
back
Wires - INOX (V4A stainless steel wire, acid resistant, crimped or straight):
Stainless steel wire, acid resistant, crimped or straight, material no. 1.4301/1.4310 or 1.4401/1.4571, dia. 0.08 mm to 1.00 mm.back
back
back
Wires - RFH (Special wire, corrosion-proof):
Special wire, corrosion-proof, resistant against process steam up to 650 °C, straight or crimped, dia. 0.30 mm to 0.50 mm.back
back
back
Wires - TRD (Special wire, highly heat resistant):
Special wire, highly heat resistant up to 1350 °C, crimped, dia. 0.30 mm to 0.50 mm.back
back
back
Wires - SSD (Steel wire):
Steel wire, natural hard, extra hard, crimped, dia. 0.12 mm to 0,25 mm.back
back
back
Wires - ASD (steel wire, tempered, extra hard and particularly tough):
Steel wire, tempered, extra hard and particularly tough, crimped, dia. 0.20 mm to 0.50 mm.back
back
back
Wires - LIT (Brass-coated steel wire in cord construction):
Brass-coated steel wire in cord construction, springy and tough, crimped, dia. 0.15 mm to 0.38 mmback
back
back
Wires - LTE (Brass-coated steel wire, single wire):
Brass-coated steel wire, single wire, springy, crimped, dia. 0.15 mm nto 0.38 mmback
back
back
Wires - AZD (Steel wire, tempered, hard and tough):
Steel wire, tempered, hard and tough, straight, dia. 0.25 mm to 0.80 mm.back
back
back
Wires - FLA (Flat wire, tempered):
Flat wire, tempered, straight, 1.10 mm x 0.25 mm to 3.30 mm x 0.75 mm (or on request)back
Applications for Strip roller brush type 350
Building material industry
- cleaning
- cleaning of paling-boards
Wood-working industry
- conveyor-belt cleaning
Ceramics industry
- cleaning
- plunger cleaning
(Vulcanized) Rubber processing
- cleaning
Machine industry
- dust collecting, dedusting
Food industry
- powdering
- coating, bespreading
- sprinkling
Metal working industry
- removing of dirt
- coating, bespreading
- oiling
Industry generally
- dust collecting, dedusting
- conveyor-belt cleaning
- cleaning
Conveying machinery of all ind.
- conveyor-belt cleaning
Agriculture
- conveyor-belt cleaning
Rolling mill industry
- conveyor-belt cleaning
Find your contact person
The fill configuration is either dense (EC1) or light (EC2) which means an axial strip configuration.
You can use almost alll type of fill material except synthetic bristles exceeding dia. 0.60 mm and wires exceeding dia. 0.20 mm.
You can use almost alll type of fill material except synthetic bristles exceeding dia. 0.60 mm and wires exceeding dia. 0.20 mm.
The strip brushes for the roller brush types 350 are mounted in the profiled aluminium tube cores
- either with standard bore (AL 31 resp.
60 mm) to be seated on a primary shaft.
- or with reduced bore by bushes to be seated on a primary shaft.
- or with journals.
- either with standard bore (AL 31 resp.
60 mm) to be seated on a primary shaft.
- or with reduced bore by bushes to be seated on a primary shaft.
- or with journals.
Type 350 Aluminium profile core with standard bore
| Type | Total-Ø GD (mm) | Core-Ø KD (mm) | Face width BLG (mm) | Bore hole AL (mm) | ||
|---|---|---|---|---|---|---|
| 350/54 | 100-200 | 54 | max. 2000 | max. 31 | DXF | enquiry |
| 350/85 | 150-300 | 85 | max. 3000 | max. 60 | DXF | enquiry |
Type 350 Aluminium profile core with reduction bushes
| Type | Total-Ø GD (mm) | Core-Ø KD (mm) | Face width BLG (mm) | Bore hole AL (mm) | ||
|---|---|---|---|---|---|---|
| 350/54 | 100-200 | 54 | max. 2000 | max. 31 | DXF | enquiry |
| 350/85 | 150-300 | 85 | max. 3000 | max. 60 | DXF | enquiry |
Type 350 Aluminium profile core with stub axles
| Type | Total-Ø GD (mm) | Core-Ø KD (mm) | Face width BLG (mm) | Bore hole AL (mm) | ||
|---|---|---|---|---|---|---|
| 350/54 | 100-200 | 54 | max. 2000 | max. 31 | DXF | enquiry |
| 350/85 | 150-300 | 85 | max. 3000 | max. 60 | DXF | enquiry |
KULLEN GmbH & Co. KG
Am Heilbrunnen 83
D-72766 Reutlingen
Tel.: +49 (0)7121/142-0
Fax: +49 (0)7121/142-260
E-Mail: post[at]kullen.de
www.Kullen.de
KULLEN GmbH & Co. KG Am Heilbrunnen 83 D- 72766 Reutlingen
Tel.: +49 (0)7121/142-0 Fax: +49 (0)7121/142-260 E-Mail: post[at]kullen.de
Tel.: +49 (0)7121/142-0 Fax: +49 (0)7121/142-260 E-Mail: post[at]kullen.de