KULLEN-KOTI was granted a patent for its unique spiral brush design with a double-sheet backing tape as early as 1931. Although the brush has been continuously developed and improved, one essential feature has remained unchanged: the double-sheet backing tape. It continues to provide an exceptionally secure method of retaining the filling material, as illustrated in the construction drawing (see DXF drawing).
Available Brush Backing Sections
We manufacture four different brush backing section types with backing widths (WB) ranging from 4 mm to 18 mm. The most suitable backing section is selected according to your application, taking all relevant technical parameters into account.
Backing tapes are available in bright or galvanised steel, as well as corrosion-, acid- and temperature-resistant materials, including grades 1.4301, 1.4571 and 1.4541.
Versatility
DBS spiral brush coils can be mounted on different roller brush core systems, providing exceptional flexibility in terms of filling materials, fill arrangements and fill densities.
Depending on the filling material and dimensions, the fill density can be increased by up to 75% to achieve an extremely dense brush surface. This makes DBS spiral brush coils particularly suitable for applications requiring individual brush configurations and high filling densities.
| DBS Spiral Brush Coils – Without Shaft | ||||||
| Min. Core Diameter (mm) | Max. Core Diameter (mm) | Min. Overall Diameter (mm) | Max. Overall Diameter (mm) | Min. Face Width (mm) | Max. Face Width (mm) | DXF |
| 20 | 450 | 50 | 600 | 100 | 6000 | DXF |
| Maximum Bristle and Wire Diameters | ||
| KD (mm) | Synthetic Bristles (mm) | Wire (mm) |
| 20 - 40 | 0.80 | 0.20 |
| 50 - 80 | 1.20 | 0.50 * |
| > 80 | 3 | 0.50 * |
The type of bristle material we use for your brushes depends on your application, your industry, and your product. Do you have questions about bristle material? Just contact us.
| Brush construction | ||
| Type of fill material | Fill material | Properties |
| Synthetic fibres | PP (Polypropylen) | Polypropylene, acid-resistant, smooth or crimped, colors available on request. Diameter 0.10 – 1.00 mm. |
| Synthetic fibres | PAP (special bristle for wet applications based on PP) | Special bristle for wet applications based on polypropylene, offering longer service life due to acid resistance at high temperatures; available in smooth or crimped versions, colors on request, diameter 0.15 – 1.00 mm. |
| Synthetic fibres | PBT (Polyester) | Polyester, smooth or crimped, colors available on request, diameter 0.20 – 3.00 mm. |
| Synthetic fibres | PA 6.6 (Polyamid) | All polyamid qualities have strong recovery properties. PA 6.6 is the filament with the highest rigidity in dry application before PA 6.12 and PA 6. In case of wet use PA 6.12 ranks before PA 6.6 and PA 6 because of the lowest water absorption. |
| Synthetic fibres | PA 6.12 (Polyamid) | Polyamide, smooth or crimped, colors available on request, diameter 0.08 – 3.00 mm. All polyamide grades are characterized by excellent recovery properties. In wet applications, PA 6.12 offers the best stiffness due to its minimal water absorption. |
| Synthetic fibres | KBL (PA-based, alkali- and temperature-resistant) | Special bristle based on polyamide, highly resistant to alkalis even at elevated temperatures; available in smooth or crimped form, brown in colour, with diameters ranging from 0.08 to 1.50 mm. |
| Synthetic fibres | HCB (high-temperature and chemical-resistant) | High-temperature resistant (up to max. 200 °C) and extremely chemical-resistant special bristle, smooth, colors available on request, diameter 0.20 – 0.60 mm. |
| Synthetic fibres | PE (Polyethylen) | Polyethylene, smooth, slotted or unslotted in X-profile, colors available on request, diameter 0.08 – 1.00 mm. |
| Synthetic fibres | CON (electrically conductive special bristle) | Electrically conductive special bristle (up to 5 × 10 kOhm/cm²) based on polyamide, smooth, black, temperature resistance up to 100 °C, Ø 0.13 mm. For large order volumes, the following bristle diameters are also available: 0.21 mm, 0.41 mm, 0.52 mm, and 0.64 mm. |
| ANDERLON abrasive brushes | ANS PA6 (polyamide; embedded abrasive grain) | Polyamide; embedded abrasive grain |
| ANDERLON abrasive brushes | ANS PA6.12 (polyamide; embedded abrasive grain) | PA 6.12 offers the best abrasion resistance and maintains its stiffness during wet operation due to its low water absorption. |
| ANDERLON abrasive brushes | ANS KBL (Anderlon, alkali-resistant) | KBL is particularly suitable for use with alkalis at higher pH levels and elevated temperatures. |
| ANDERLON abrasive brushes | ANS-R (Round Brush with Silicon Carbide Grit) | Grit size – Filament Ø K 1000 0.25 mm K 800 0.25 mm K 600 0.25 mm K 600 0.30 mm K 600 0.45 mm K 500 0.25 mm K 500 0.45 mm K 320 0.55 mm K 240 0.75 mm K 180 0.90 mm K 120 0.55 mm K 120 1.00 mm K 80 1.00 mm K 80 1.27 mm K 60 1.15 mm K 60 1.50 mm K 46 1.60 mm |
| ANDERLON abrasive brushes | ANS-F (Anderlon Flat Brush) |
Flat filaments (1.20 x 2.50 mm and 1.14 x 2.28 mm) are designed for longer service life and shorter processing times. They are characterized by high stiffness and a high content of abrasive grain. These flat filaments are typically used with coarse grit sizes, such as grit 80. |
| ANDERLON abrasive brushes | ANA (Anderlon round brush with aluminium oxide grit) | Grit size – Filament Ø K 1000 0.25 mm K 800 0.25 mm K 600 0.25 mm K 600 0.30 mm K 600 0.45 mm K 500 0.25 mm K 500 0.45 mm K 320 0.55 mm K 240 0.75 mm K 180 0.90 mm K 120 0.55 mm K 120 1.00 mm K 80 1.00 mm K 80 1.27 mm K 60 1.15 mm K 60 1.50 mm K 46 1.60 mm |
| ANDERLON abrasive brushes | AND (Anderlon with diamond grit) | Diamond grit can take a beating. Thanks to its diamond grit, this filament offers maximum aggressiveness and durability. It is therefore specifically used in the processing of carbide tools. |
| Wires | BES (Bessemer steel wire) | Crimped Bessemer steel wire. Diameter: 0.06–0.25 mm. |
| Wires | PHB (phosphor bronze wire [CuSn]) | Phosphor bronze wire (CuSn), smooth or wavy, diameter from 0.05 to 0.50 mm |
| Wires | MES (brass wire (CuZn)) | Brass wire (CuZn), smooth or crimped, diameter 0.06 – 0.56 mm. |
| Wires | NSI (nickel silver wire [CuNi]) | Nickel silver wire (CuNi), crimped, diameter 0.06 – 0.25 mm. |
| Wires | STD (steel wire, natural hard) | Steel wire, natural hard, crimped, diameter 0.06 – 0.80 mm. |
| Wires | SUP (steel wire, hardened) | Steel wire, hardened, smooth, diameter 0.30 – 1.20 mm. |
| Wires | INOX (V2A wire, stainless and acid-resistant) | Corrosion- and acid-resistant stainless steel wire, straight or crimped. Material grades 1.4301 / 1.4310. Diameter: 0.08–1.00 mm. |
| Wires | INOX (V4A wire, stainless and acid-resistant) | Steel wire, stainless and acid-resistant, smooth or crimped, material no. 1.4401 / 1.4571, diameter 0.08 – 1.00 mm. |
| Wires | RFH (corrosion-resistant specialty wire) | Corrosion-resistant specialty wire, resistant to process steam up to 650 °C, available in smooth or crimped form, diameter 0.30 – 0.50 mm. |
| Wires | TRD (special wire, high-temperature resistant) | Special wire, high-temperature resistant up to 1350 °C, crimped, diameter 0.30 – 0.50 mm. |
| Wires | SSD (steel wire) | Natural hard, extra hard, and tough, crimped – diameter 0.12–0.25 mm |
| Wires | ASD (steel wire, hardened, extra hard and tough) | ASD (steel wire, hardened, extra hard and tough) |
| Wires | LIT (steel wire, brass-coated, in cord construction) | Steel wire, brass-coated, springy and tough, in cord construction, crimped, diameter 0.15 – 0.38 mm. |
| Wires | LTE (steel wire, brass-coated, single wire) | Steel wire, brass-coated, single wire, springy, crimped, diameter 0.15 – 0.38 mm. |
| Wires | AZD (steel wire, hardened, hard and tough) | Hardened steel wire – hard and tough, with a smooth surface. Available diameters: 0.35 to 0.80 mm. |
| Wires | FLA (flat wire, hardened) | Flat wire, hardened, smooth, 1.10 × 0.25 to 3.30 × 0.75 mm, or upon request. |
| Natural fibres | ROS (horsehair – soft to medium-hard) | Horsehair, soft to medium-hard, black in colour. |
| Natural fibres | ROS-GU (horsehair – hard) | Horsehair, hard, natural grey in colour. |
| Natural fibres | MAH (Mane hair) | Horse hair, soft, natural grey/natural black |
| Natural fibres | ZIE (goat hair) | Goat hair, exceptionally soft, suitable for sensitive surfaces. Classified as fine hair and processed by KULLEN exclusively in premium quality. |
| Plant fibre | FIB (Mexico fibre – medium-hard) | Mexico fibre, medium-hard. |
| Plant fibre | FIB-GU (Mexico fibre – medium-hard to hard) | Mexico fibre, medium-hard to hard, grey in colour. |
| Plant fibre | SIS (sisal cord) | Sisal cord – cord diameter 2.8 to 5.0 mm |
| Brush construction | |
| Core systems | Possible core materials |
| Steel shaft (solid shaft) with or without keyway |
Steel; plastic-coated steel; corrosion-, acid- and heat-resistant stainless steel (material no. 1.4301 to 1.4571, 2.4879 for high-temperature resistance); light metal. Where required by the specified brush rotation speed and operating conditions, the cores are dynamically balanced to quality grade G 2.5 according to ISO 1940, with certification. |
| Tube body with journals for drive and bearing |
Steel; plastic-coated steel; corrosion-, acid- and heat-resistant stainless steel (material no. 1.4301 to 1.4571, 2.4879 for high-temperature resistance); light metal. Where required by the specified brush rotation speed and operating conditions, the cores are dynamically balanced to quality grade G 2.5 according to ISO 1940, with certification. |
| Brush construction | |||||
| Fill Arrangement | Fill Arrangement | Properties | |||
| Full-Density Filling | EA3 – Low Fill Density | Low fill density for uniform surface treatment. | |||
| Full-Density Filling | EA2 – Medium Fill Density | Medium fill density for uniform surface treatment. | |||
| Full-Density Filling | EA1 – High Fill Density | High fill density for uniform surface treatment. | |||
| Spiral Filling | EB2 – Right-Hand Spiral | Right-hand spiral arrangement. | |||
| Spiral Filling | EB1 – Left-Hand Spiral | Left-hand spiral arrangement for conveying removed material. | |||
Do you have questions about our products or are you looking for a different solution? Get in touch with us, we’re here to help.