Brushing Solution for Spreading

Examples are the even spreading of greases, oils and sugar powder on surfaces and the pickling of metal.

Circular and Roller Brushes

Circular brushes are defined as brushes with a body length of up to 100 mm. The comprehensive range of dimensions, core materials, fill materials and fill configurations demonstrate the versability of Kullen-Koti again and again.

Roller brushes Type 421 without a sub-body are defined as having a body length longer than 100 mm (for brushes shorter than 100 mm, see "Circular brushes"). The comprehensive range of dimensions, core materials, fill materials and fill configurations demonstrate the versability of Kullen-Koti again and again.

Roller brushes Type 422 with sub-bodies e. g. tubular cores with journals are defined as having a body length longer than 100 mm (for brushes shorter than 100 mm, see "Circular brushes").The brush cores are mounted on steel or aluminium shafts for strenth and rigidity.

ST-System

The brush cores are made of special reinforced polypropylene making them light, resistant to acids and alkalis and suitable for use in the food industry. The range of dimensions is extensive. All in all we offer seven standard core diameters with three fill density variations each: low, medium, and high - making a total of twenty-one standard cores to choose from.

The ST-system above all is suitable for roller brushes fitted to a shaft or tubular core with journals made of steel or stainless steel (1.4301; 1.4541).

Roller Brushes with Metal Backing Tape

Back in 1931 the history of an inimitable brush began: Kullen-Koti was already the patentee for this spiral brush with a double-sheet backing tape.

The DBS-Spiral roller brushes types 220 & 221 are extremely flexible in their dimension and depending on the required performance these endless spiral brush coils are mounted on core systems made of mild steel, stainless steel or non-ferrous metal.

Our roller brush coil designed as welded package system will also pack the tiger in your tank! Why is it reasonable and advantageous to purchase a welded package system type 231?

A further variation of the "Throw-Away" system is type 230. It consists of continuously wound DBS-spiral brushes fitted to a thin walled steel, stainless steel or non-ferrous metal tubular shaft.

The long period of development of this brush type has left its mark and appears in every detail of the brush. The STS-spiral coil is the only brush type that can be produced with very small diameters.

A very interesting aspect of our STS-spiral coils is the type with inverted fill material that is used, for instance, for polishing, descaling or removal of corrosion off rods or wires in a continuous operation.With an outside diameter of only 20 mm it is possible to reach an inner diameter of zero.

The STS-spiral roller brush range contains all measurements from small to extra large and this unbeatable selection of diameters makes this brush a totally reliable tool for light brushing tasks.

The Kullen-Koti roller brush type 350 is one of our "highlights" as it consists of a lightweight aluminium core with horizontal grooves where strip brushes are fitted in.

Type 964 is made of single section brushes mounted together on a core up to the required face width. This roller brush type can be mounted on cores made from stainless steel, plastic coated steel or mild steel.