ANDERLON abrasive filaments:
backWires:
- BES (Bessemer steel wire)
- PHB (Phosphor-bronze-wire (CuSn])
- MES (Brass-wire [CuZn])
- NSI (Nickel-silver-wire [CuNi])
- STD [Steel wire, natural hard]
- SUP (steel wire, tempered, straight)
- INOX (V2A stainless steel wire, acid resistant, crimped or straight)
- INOX (V4A stainless steel wire, acid resistant, crimped or straight)
- RFH (Special wire, corrosion-proof)
- TRD (Special wire, highly heat resistant)
- SSD (Steel wire)
- ASD (steel wire, tempered, extra hard and particularly tough)
- LIT (Brass-coated steel wire in cord construction)
- LTE (Brass-coated steel wire, single wire)
- AZD (Steel wire, tempered, hard and tough)
- FLA (Flat wire, tempered)
backSynthetic bristles - PP (Polypropylen):
Polypropylene, acid resistant, straight or crimped, colours on request, dia. 0.10 mm to 1.00 mm.
backSynthetic bristles - PAP (Special filament polypropylene based on PP):
Special filament polypropylene based which gives longer live through
acid resistance at high temperatures,straight or crimped, colours on
request, dia. 0.15 mm to 1.00 mm.
backSynthetic bristles - PBT (Polyester):
Polyester, straight or crimped, colours on request, dia. 0.20 mm to 3.00 mm. backSynthetic bristles - PA 6.6 (Polyamide):
All polyamid qualities have strong recovery properties. PA 6.6 is the filament with the highest rigidity in dry application before PA 6.12 and PA 6. In case of wet use PA 6.12 ranks before PA 6.6 and PA 6 because of the lowest water absorption. backSynthetic bristles - PA 6.12 (Polyamide):
Polyamide, straight or crimped, colours on request. Diameter 0,08 - 3,00 mm. All polyamid qualities have strong recovery properties. In case of wet use PA 6.12
ranks before PA 6.6 and PA 6 because of the lowest water absorption.
backSynthetic bristles - KBL (Special bristle based on, very good alkaline and temperature resistance):
Special bristle based on polyamide, very good alkaline resistance also at high temperatures, straight or crimped, colours on request, dia. 0.08 mm to 1.50 mm. backSynthetic bristles - HCB (Extremely heat and chemical resistant):
Extremely heat resistant (up to max. 200 °C) and chemical resistant special straight filament, colours on request, dia. 0.20 mm to 0.60 mm. backSynthetic bristles - PE (Polyethylene):
Polyethylene, straight or in x-cross-section, either flagged or normal, colours on request, dia. 0.80 mm to 1.00 mm.
backSynthetic bristles - CON (Electrically conductive, special filament):
electrically conductive, special filament (up to 5 x10 kOhm/cm2) based on polyamide, straight, black,temperature resistant up to 100 °C, dia. 0.13 mm and 0,25 mm. For large quantities the following bristle-dia. are available to special order: 0.21 mm, 0.41 mm, 0.52 mm and 0.64 mm.
backANDERLON abrasive filaments - ANS PA6 (Polyamide; embedded abrasive grit):
Polyamide; embedded abrasive grit
backANDERLON abrasive filaments - ANS PA6.12 (Polyamide; embedded abrasive grit):
PA 6.12 besitzt die beste Abriebfestigkeit und behält im Naßbetrieb durch geringe Wasseraufnahme seine gute Steifigkeit backANDERLON abrasive filaments - ANS KBL (Anderlon, lye-steadily):
Special bristle based on polyamide, very good alkaline resistance also at high temperatures, straight or crimped, colours on request, dia. 0.08 mm to 1.50 mm. backANDERLON abrasive filaments - ANS-R (Round filament with embedded silicon carbide):
Table
| Grit-size | Bristle-Ø |
| K 1000 | 0.25 mm |
| K 800 | 0.25 mm |
| K 600 | 0.25 mm |
| K 600 | 0.30 mm |
| K 600 | 0.45 mm |
| K 500 | 0.25 mm |
| K 500 | 0.45 mm |
| K 320 | 0.55 mm |
| K 240 | 0.75 mm |
| K 180 | 0.90 mm |
| K 120 | 0.55 mm |
| K 120 | 1.00 mm |
| K 80 | 1.00 mm |
| K 80 | 1.27 mm |
| K 60 | 1.15 mm |
| K 60 | 1.50 mm |
| K 46 | 1.60 mm |
backANDERLON abrasive filaments - ANS-F (Anderlon-Flat bristle):
A flat bristle (1.20 x 2.50 mm) and (1.14 x 2.28 mm) für that gives longer life and shorter processing time, is very stiff and contains a high percentage of abrasive grit.These flat bristles are normally used with coarse grain, eg grit 80.
We recommend to have a word with our specialists to ensure you receive the best material for your application.
backANDERLON abrasive filaments - ANA (Anderlon round filament with aluminium oxide):
Table
| Grit-size | Bristle-Ø |
| K 1000 | 0.25 mm |
| K 800 | 0.25 mm |
| K 600 | 0.25 mm |
| K 600 | 0.30 mm |
| K 600 | 0.45 mm |
| K 500 | 0.25 mm |
| K 500 | 0.45 mm |
| K 320 | 0.55 mm |
| K 240 | 0.75 mm |
| K 180 | 0.90 mm |
| K 120 | 0.55 mm |
| K 120 | 1.00 mm |
| K 80 | 1.00 mm |
| K 80 | 1.27 mm |
| K 60 | 1.15 mm |
| K 60 | 1.50 mm |
| K 46 | 1.60 mm |
backANDERLON abrasive filaments - AND (Anderlon with diamond grit):
Diamond grain is aggressive towards almost everything! Due to this diamond grain the AND filament has maximum aggression and a considerable lifetime. Therefore this ANDERLON quality is especially used for the treatment of hard alloy tools.
backWires - BES (Bessemer steel wire):
Bessemer steel wire, crimped, dia. 0.06 mm to 0.25 mm.
backWires - PHB (Phosphor-bronze-wire (CuSn]):
Phosphor-bronze-wire (CuSn), straight or crimped, dia. 0.05 mm to 0.50 mm. backWires - MES (Brass-wire [CuZn]):
Brass wire (CuZn), straight or crimped, dia. 0.06 mm to 0.56 mm. backWires - NSI (Nickel-silver-wire [CuNi]):
Nickel-silver-wire (CuNi), crimped, dia 0.06 mm to 0.25 mm. backWires - STD [Steel wire, natural hard]:
Steel wire, natural hard, crimped, dia. 0.06 mm to 0.80 mm.
backWires - SUP (steel wire, tempered, straight):
steel wire, tempered, straight, dia. 0.30 mm to 1.20 mm. backWires - INOX (V2A stainless steel wire, acid resistant, crimped or straight):
Stainless steel wire, acid resistant, crimped or straight, material no. 1.4301/1.4310 or 1.4401/1.4571, dia. 0.08 mm to 1.00 mm. backWires - INOX (V4A stainless steel wire, acid resistant, crimped or straight):
Stainless steel wire, acid resistant, crimped or straight, material no. 1.4301/1.4310 or 1.4401/1.4571, dia. 0.08 mm to 1.00 mm. backWires - RFH (Special wire, corrosion-proof):
Special wire, corrosion-proof, resistant against process steam up to 650 °C, straight or crimped, dia. 0.30 mm to 0.50 mm. backWires - TRD (Special wire, highly heat resistant):
Special wire, highly heat resistant up to 1350 °C, crimped, dia. 0.30 mm to 0.50 mm. backWires - SSD (Steel wire):
Steel wire, natural hard, extra hard, crimped, dia. 0.12 mm to 0,25 mm. backWires - ASD (steel wire, tempered, extra hard and particularly tough):
Steel wire, tempered, extra hard and particularly tough, crimped, dia. 0.20 mm to 0.50 mm. backWires - LIT (Brass-coated steel wire in cord construction):
Brass-coated steel wire in cord construction, springy and tough, crimped, dia. 0.15 mm to 0.38 mm
backWires - LTE (Brass-coated steel wire, single wire):
Brass-coated steel wire, single wire, springy, crimped, dia. 0.15 mm nto 0.38 mm
backWires - AZD (Steel wire, tempered, hard and tough):
Steel wire, tempered, hard and tough, straight, dia. 0.25 mm to 0.80 mm.
backWires - FLA (Flat wire, tempered):
Flat wire, tempered, straight, 1.10 mm x 0.25 mm to 3.30 mm x 0.75 mm (or on request) backNatural hair - ROS (Horse hair, soft or medium):
Horse hair, soft or medium
backNatural hair - ROS-GU (Horse hair, hard):
Horse hair, hard, natural grey
backNatural hair - MAH (Mane hair):
Mane hair, soft, natural grey/natural black
backNatural hair - ZIE (Goat hair):
Goat hair, extremely soft, is known as a so-called ”fine hair“. KULLEN principally uses only firstclass quality.
backPlant fibres - FIB (Tampico-Fibre, medium hard):
Tampico-Fibre, medium
backPlant fibres - FIB-GU (Tampico-Fibre, medium):
Tampico-Fibre, medium to hard, grey
backPlant fibres - SIS (Sisal twines):
Sisal twines, twine dia. Diameter from 2.8 mm to 5.0 mm
backSolid steel shaft - WK1
Solid steel shaft with/without key
Possible Body materials:We manufacture the cores in steel, steel-plastic coated, non ferrous metal or stainless and acid resistant steel No. 1.4301, 1.4571 or 2.4879, adequate
for wet or dry operation or for high temperature.
Should you be in need of certified, electrodynamically balanced cores for a fixed rotation speed or other working conditions in your plant – we will do it to balancing standard G 2,5 (ISO 1940).
backTubular core with axles - WK2
Tubular core with stub axles for drive and bearing
Possible Body materials:We manufacture the cores in steel, steel-plastic coated, non ferrous metal or stainless and acid resistant steel No. 1.4301, 1.4571 or 2.4879, adequate
for wet or dry operation or for high temperature.
Should you be in need of certified, electrodynamically balanced cores for a fixed rotation speed or other working conditions in your plant – we will do it to balancing standard G 2,5 (ISO 1940).
backCompressed surface - EA1 (high compressed fill):
High compressed fill for even treatment of surfaces.
backCompressed surface - EA2 (medium compressed fill):
Medium compressed fill for even treatment of surfaces.
backCompressed surface - EA3 (low compressed fill):
Low density of fill for even surface treatment.
back 
