KULLEN’s moulded disc brushes are primarily used for deburring and surface processing applications in industrial manufacturing environments. Their design enables significantly higher fill densities than can be achieved with tufted or other disc brush constructions.The high concentration of filaments creates a particularly uniform brushing surface, providing consistent and repeatable processing results. This makes moulded disc brushes especially suitable for demanding deburring operations where process reliability and surface quality are critical.
Brush mountings and interfaces can be individually adapted to suit machine requirements and specific production processes.
In many applications, abrasive filaments and wire fillings are used to achieve controlled material removal and effective edge finishing. Depending on operational requirements, virtually all available filling materials can be incorporated into the moulded brush body.
| Brush disc moulded | |||
| Outer diameter min. - max. (mm) | Core Thickness min. (mm) | Trim Height min. - max. (mm) | DXF |
| 30 - 250 | 13 | 8 - 200 | DXF |
The type of fill material we use for your brushes depends on your application, your industry, and your product. Do you have questions about bristle materials? Just contact us.
| Brush construction | ||
| Type of fill material | Fill material | Properties |
| Synthetic fibres | PP (Polypropylen) | Polypropylene, acid-resistant, smooth or corrugated, colors available upon request. Diameter 0.10–1.00 mm |
| Synthetic fibres | PAP (special bristle for wet applications based on PP) | Special bristle for wet applications based on polypropylene, offering longer service life due to acid resistance at high temperatures; available in smooth or crimped versions, colors on request, diameter 0.15 – 1.00 mm. |
| Synthetic fibres | PBT (Polyester) | Polyester, smooth or crimped, colors available on request, diameter 0.20 – 3.00 mm. |
| Synthetic fibres | PA 6.6 (Polyamid) | All polyamid qualities have strong recovery properties. PA 6.6 is the filament with the highest rigidity in dry application before PA 6.12 and PA 6. In case of wet use PA 6.12 ranks before PA 6.6 and PA 6 because of the lowest water absorption. |
| Synthetic fibres | PA 6.12 (Polyamid) | Polyamide, smooth or crimped, colors available on request, diameter 0.08 – 3.00 mm. All polyamide grades are characterized by excellent recovery properties. In wet applications, PA 6.12 offers the best stiffness due to its minimal water absorption. |
| Synthetic fibres | KBL (PA-based, alkali- and temperature-resistant) | Special bristle based on polyamide, highly resistant to alkalis even at high temperatures; available in smooth or crimped form, brown color, diameter 0.08 – 1.50 mm. |
| Synthetic fibres | HCB (high-temperature and chemical-resistant) | High-temperature resistant (up to max. 200 °C) and extremely chemical-resistant special bristle, smooth, colors available on request, diameter 0.20 – 0.60 mm. |
| Synthetic fibres | PE (Polyethylen) | Polyethylene, smooth, slotted or unslotted in X-profile, colors available on request, diameter 0.08 – 1.00 mm. |
| Synthetic fibres | CON (electrically conductive special bristle) | Electrically conductive special bristle (up to 5 × 10 kOhm/cm²) based on polyamide, smooth, black, temperature resistance up to 100 °C, Ø 0.13 mm. For large order volumes, the following bristle diameters are also available: 0.21 mm, 0.41 mm, 0.52 mm, and 0.64 mm. |
| ANDERLON abrasive brushes | ANS PA6 (polyamide; embedded abrasive grain) | Chinese hog bristles – medium-hard to hard, available in grey or black. |
| ANDERLON abrasive brushes | ANS PA6.12 (polyamide; embedded abrasive grain) | PA 6.12 offers excellent abrasion resistance and retains its stiffness in wet applications due to low water absorption. |
| ANDERLON abrasive brushes | ANS KBL (Anderlon, alkali-resistant) | Particularly suitable for applications involving alkaline solutions at elevated pH levels and temperatures. |
| ANDERLON abrasive brushes | ANS-R (Round Brush with Silicon Carbide Grit) | Round Brush with Silicon Carbide Grit |
| ANDERLON abrasive brushes | ANS-F (Anderlon Flat Brush) | ANDERLON Abrasive Bristles - ANS-F (Anderlon Flat Bristle): Flat bristles (1.20 x 2.50 mm) and (1.14 x 2.28 mm) for longer service life and shorter processing times; characterized by high rigidity and a high proportion of abrasive grains. These flat brushes are typically used with coarse grits, e.g., grit 80. We recommend that you contact our technical advisors so that we can suggest the appropriate fill material for your specific application. |
| ANDERLON abrasive brushes | ANA (Anderlon round brush with aluminium oxide grit) | At KULLEN, we precisely match the bristle diameter to the respective grit size: K1000, K800, K600, and K500 use a diameter of 0.25 mm; K600 and K500 also use diameters of 0.30 mm and 0.45 mm, respectively. K320 has a diameter of 0.55 mm, K240 has a diameter of 0.75 mm, and K180 has a diameter of 0.90 mm. K120 is available in diameters of 0.55 mm and 1.00 mm, while K80 is available in diameters of 1.00 mm and 1.27 mm. For coarser applications, we offer the K60 with diameters of 1.15 mm and 1.50 mm, as well as the K46 with a diameter of 1.60 mm. This ensures that every brush is optimally tailored to its specific application. |
| ANDERLON abrasive brushes | AND (Anderlon with diamond grit) | Diamond grit is extremely durable. Thanks to the diamond grit, this bristle offers maximum abrasiveness and longevity. It is therefore used specifically for machining carbide tools. We recommend that you contact our technical advisors so that we can suggest the right bristle material for your application. |
| Wires | BES (Bessemer steel wire) | Wavy Bessemer steel wire, diameter from 0.06 to 0.25 mm |
| Wires | PHB (phosphor bronze wire [CuSn]) | Phosphor bronze wire (CuSn), smooth or wavy, diameter from 0.05 to 0.50 mm |
| Wires | MES (brass wire (CuZn)) | Brass wire (CuZn), smooth or crimped, diameter 0.06 – 0.56 mm. |
| Wires | NSI (nickel silver wire [CuNi]) | Nickel silver wire (CuNi), crimped, diameter 0.06 – 0.25 mm. |
| Wires | STD (steel wire, natural hard) | Steel wire, natural hard, crimped, diameter 0.06 – 0.80 mm. |
| Wires | SUP (steel wire, hardened) | Steel wire, hardened, smooth, diameter 0.30 – 1.20 mm. |
| Wires | INOX (V2A wire, stainless and acid-resistant) | Stainless and acid-resistant steel wire, smooth or crimped, material no. 1.4301 / 1.4310, diameter 0.08 – 1.00 mm. |
| Wires | INOX (V4A wire, stainless and acid-resistant) | Steel wire, stainless and acid-resistant, smooth or crimped, material no. 1.4401 / 1.4571, diameter 0.08 – 1.00 mm. |
| Wires | RFH (corrosion-resistant specialty wire) | Corrosion-resistant specialty wire, resistant to process steam up to 650 °C, available in smooth or crimped form, diameter 0.30 – 0.50 mm. |
| Wires | TRD (special wire, high-temperature resistant) | Special wire, high-temperature resistant up to 1350 °C, crimped, diameter 0.30 – 0.50 mm. |
| Wires | SSD (steel wire) | Natural hard, extra hard and tough, crimped, diameter 0.12 – 0.25 mm. |
| Wires | ASD (steel wire, hardened, extra hard and tough) | ASD (steel wire, hardened, extra hard and tough) |
| Wires | LIT (steel wire, brass-coated, in cord construction) | Steel wire, brass-coated, springy and tough, in cord construction, crimped, diameter 0.15 – 0.38 mm. |
| Wires | LTE (steel wire, brass-coated, single wire) | Steel wire, brass-coated, single wire, springy, crimped, diameter 0.15 – 0.38 mm. |
| Wires | AZD (steel wire, hardened, hard and tough) | Steel wire, hardened, hard and tough, smooth, diameter 0.35 – 0.80 mm. |
| Wires | FLA (flat wire, hardened) | Flat wire, hardened, smooth, 1.10 × 0.25 to 3.30 × 0.75 mm, or upon request. |
| Natural fibres | Chinese hog bristles (CHS) | Chinese hog bristles – medium-hard to hard, available in grey or black. |
| Natural fibres | ROS (horsehair – soft to medium-hard) | Horsehair – soft to medium-hard, black. |
| Natural fibres | ROS-GU (horsehair – hard) | Horsehair – hard, natural grey. |
| Natural fibres | MAH (Mane hair) | Mane hair – soft, natural grey or natural black. |
| Natural fibres | ZIE (goat hair) | Goat hair, exceptionally soft, suitable for sensitive surfaces. Classified as fine hair and processed by KULLEN exclusively in premium quality. |
| Plant fibre | FIB (Mexico fibre – medium-hard) | Mexico fibre – medium-hard |
| Plant fibre | FIB-GU (Mexico fibre – medium-hard to hard) | Mexico fibre – medium-hard to hard, grey |
| Plant fibre | SIS (sisal cord) | Sisal cord – cord diameter 2.8 to 5.0 mm |
|
Ostrich Feathers |
Ostrich Feathers |
Ostrich feathers are particularly suitable for non-abrasive dust removal on sensitive surfaces. Their natural electrostatic properties effectively attract and retain dust particles without damaging the material being cleaned. Typical applications include painting and coating processes where components must be completely free of dust before further processing. In the automotive industry, ostrich feather brushes are frequently used to clean body panels prior to painting. In addition to their excellent cleaning performance, ostrich feathers offer exceptional softness, flexibility and durability. This combination enables gentle cleaning over long operating periods while supporting consistently high surface quality. |
| Fill Arrangement | ||
| Full-Density Filling | EA1 – High Fill Density | High fill density for uniform surface treatment. |
| Full-Density Filling | EA2 – Medium Fill Density | Medium fill density for uniform surface treatment. |
Do you have questions about our products or are you looking for a different solution? Get in touch with us, we’re here to help.