Reliable drive and guidance

V-belt Brushes

Our V-belt brushes combine reliable power transmission with effective cleaning. Their V-shaped profile ensures presice tracking and dependable operation in industrial applications.

Your benefits at a glance:

  • Reliable power transmission thanks to the V-shaped belt profile
  • Filling materials made from natural and synthetic fibres
  • Appropriate belt pre-tensioning for smooth, trouble-free operation
  • Combines conveying and cleaning in a single system
  • Robust and durbale for continuos industrial use

V-belt brushes

For this brush design, we use V-belts with standard profiles made from polyester elastomer. The material is resistant to moisture, oil and grease, as well as numerous chemicals. This allows the brushes to be used within a temperature range of -15°C to +80°C. V-belt brushes can be manufactured in virtually any length, either as endless belts or in open ended versions. We offer a wide range of filling material like natural bristles, animal bristles, plant fibres and synthetic bristles. Depending on the selected filling material, the brush surface can range from very hard to very soft, allowing it to be adapted to different application requirements.

When using endless belts, proper belt pretension is an important factor. For our V-belt brushes, a belt pretension of 3% of the center distance (a) can be specified. The tensioning pulley mounting should therefore be equipped with an adjustment mechanism (e.g., a slotted hole) offering an adjustment range of 5% relative to the center distance (a).

Standardized V-belt pulleys can be used to drive the brushes. The pulley diameter must be correctly dimensioned to ensure proper belt wrap and reliable operation. The minimum permissible pulley diameters depend on the cross-sections of the standard V-belt profiles.

Models

V-belt Brushes
Filling Arrangement 8 x 5 * 10 x 6 * 13 x 8 * 17 x 11 * 20 x 12.5 * 22 x 14 * 25 x 16 * 32 x 20 * DXF
One row - RH x x x x - - - - DXF
Two rows - RH x x x x x x x x DXF
Three rows - RH - - - - x x x x DXF
Min. Pulley-Ø d (mm) 80 100 125 160 200 224 250 315 DXF

Bristle Material

The type of bristle material we use for your brushes depends on your application, your industry, and your product. Do you have questions about bristle material? Just contact us.

Brush construction
Type of fill material Fill material Properties
Synthetic fibres PP (Polypropylen) Polypropylene, acid-resistant, smooth or crimped, colors available on request. Diameter 0.10 – 1.00 mm.
Synthetic fibres PAP (special bristle for wet applications based on PP) Special bristle for wet applications based on polypropylene, offering longer service life due to acid resistance at high temperatures; available in smooth or crimped versions, colors on request, diameter 0.15 – 1.00 mm.
Synthetic fibres PBT (Polyester) Polyester, smooth or crimped, colors available on request, diameter 0.20 – 3.00 mm.
Synthetic fibres PA 6.6 (Polyamid) All polyamid qualities have strong recovery properties. PA 6.6 is the filament with the highest rigidity in dry application before PA 6.12 and PA 6. In case of wet use PA 6.12 ranks before PA 6.6 and PA 6 because of the lowest water absorption.
Synthetic fibres PA 6.12 (Polyamid) Polyamide, smooth or crimped, colors available on request, diameter 0.08 – 3.00 mm. All polyamide grades are characterized by excellent recovery properties. In wet applications, PA 6.12 offers the best stiffness due to its minimal water absorption.
Synthetic fibres KBL (PA-based, alkali- and temperature-resistant) Special bristle based on polyamide, highly resistant to alkalis even at high temperatures; available in smooth or crimped form, brown color, diameter 0.08 – 1.50 mm.
Synthetic fibres HCB (high-temperature and chemical-resistant) High-temperature resistant (up to max. 200 °C) and extremely chemical-resistant special bristle, smooth, colors available on request, diameter 0.20 – 0.60 mm.
Synthetic fibres PE (Polyethylen) Polyethylene, smooth, slotted or unslotted in X-profile, colors available on request, diameter 0.08 – 1.00 mm.
Synthetic fibres CON (electrically conductive special bristle) Electrically conductive special bristle (up to 5 × 10 kOhm/cm²) based on polyamide, smooth, black, temperature resistance up to 100 °C, Ø 0.13 mm. For large order volumes, the following bristle diameters are also available: 0.21 mm, 0.41 mm, 0.52 mm, and 0.64 mm.
Natural fibres Chinese hog bristles (CHS) Chinese hog bristles – medium-hard to hard, available in grey or black.
Natural fibres ROS (horsehair – soft to medium-hard) Horsehair – soft to medium-hard, black.
Natural fibres ROS-GU (horsehair – hard) Horsehair – hard, natural grey.
Natural fibres MAH (Mane hair) Mane hair – soft, natural grey or natural black.
Natural fibres ZIE (goat hair) Goat hair, exceptionally soft, suitable for sensitive surfaces. Classified as fine hair and processed by KULLEN exclusively in premium quality.
Plant fibre FIB (Mexico fibre – medium-hard) Mexico fibre – medium-hard
Plant fibre FIB-GU (Mexico fibre – medium-hard to hard) Mexico fibre – medium-hard to hard, grey
Plant fibre SIS (sisal cord) Sisal cord – cord diameter 2.8 to 5.0 mm
Fill Arrangement
Full-Density Filling EA3 – Low Fill Density Low fill density for uniform surface treatment.
Full-Density Filling EA2 – Medium Fill Density Medium fill density for uniform surface treatment.
Block Fill F3 (Block fill, arrow-shaped) Arrow-shaped
Block Fill F2 (Block fill, diagonal) Blocks arranged diagonally
Block Fill F1 (Block fill, rectangular) Block-shaped with gaps
Block Fill F4 (Block fill, varying trim heights) Staggered trim heights
Row Fill 1 RH (Single-row) 1 Row
Row Fill 2 RH (Double-row) 2 Rows
Row Fill 3 RH (Triple-row) 3 Rows
Infinite Possibilities

Related products

Black flexible Flat-Belt Brush

Flat-Belt Brushes

Toothed Belt Brush

Brush belt toothed

Your success is our success

Find the right solution

Do you have questions about our products or are you looking for a different solution? Get in touch with us, we’re here to help.