For this brush design, we use V-belts with standard profiles made from polyester elastomer. The material is resistant to moisture, oil and grease, as well as numerous chemicals. This allows the brushes to be used within a temperature range of -15°C to +80°C. V-belt brushes can be manufactured in virtually any length, either as endless belts or in open ended versions. We offer a wide range of filling material like natural bristles, animal bristles, plant fibres and synthetic bristles. Depending on the selected filling material, the brush surface can range from very hard to very soft, allowing it to be adapted to different application requirements.
When using endless belts, proper belt pretension is an important factor. For our V-belt brushes, a belt pretension of 3% of the center distance (a) can be specified. The tensioning pulley mounting should therefore be equipped with an adjustment mechanism (e.g., a slotted hole) offering an adjustment range of 5% relative to the center distance (a).
Standardized V-belt pulleys can be used to drive the brushes. The pulley diameter must be correctly dimensioned to ensure proper belt wrap and reliable operation. The minimum permissible pulley diameters depend on the cross-sections of the standard V-belt profiles.
| V-belt Brushes | |||||||||
| Filling Arrangement | 8 x 5 * | 10 x 6 * | 13 x 8 * | 17 x 11 * | 20 x 12.5 * | 22 x 14 * | 25 x 16 * | 32 x 20 * | DXF |
| One row - RH | x | x | x | x | - | - | - | - | DXF |
| Two rows - RH | x | x | x | x | x | x | x | x | DXF |
| Three rows - RH | - | - | - | - | x | x | x | x | DXF |
| Min. Pulley-Ø d (mm) | 80 | 100 | 125 | 160 | 200 | 224 | 250 | 315 | DXF |
The type of bristle material we use for your brushes depends on your application, your industry, and your product. Do you have questions about bristle material? Just contact us.
| Brush construction | ||
| Type of fill material | Fill material | Properties |
| Synthetic fibres | PP (Polypropylen) | Polypropylene, acid-resistant, smooth or crimped, colors available on request. Diameter 0.10 – 1.00 mm. |
| Synthetic fibres | PAP (special bristle for wet applications based on PP) | Special bristle for wet applications based on polypropylene, offering longer service life due to acid resistance at high temperatures; available in smooth or crimped versions, colors on request, diameter 0.15 – 1.00 mm. |
| Synthetic fibres | PBT (Polyester) | Polyester, smooth or crimped, colors available on request, diameter 0.20 – 3.00 mm. |
| Synthetic fibres | PA 6.6 (Polyamid) | All polyamid qualities have strong recovery properties. PA 6.6 is the filament with the highest rigidity in dry application before PA 6.12 and PA 6. In case of wet use PA 6.12 ranks before PA 6.6 and PA 6 because of the lowest water absorption. |
| Synthetic fibres | PA 6.12 (Polyamid) | Polyamide, smooth or crimped, colors available on request, diameter 0.08 – 3.00 mm. All polyamide grades are characterized by excellent recovery properties. In wet applications, PA 6.12 offers the best stiffness due to its minimal water absorption. |
| Synthetic fibres | KBL (PA-based, alkali- and temperature-resistant) | Special bristle based on polyamide, highly resistant to alkalis even at high temperatures; available in smooth or crimped form, brown color, diameter 0.08 – 1.50 mm. |
| Synthetic fibres | HCB (high-temperature and chemical-resistant) | High-temperature resistant (up to max. 200 °C) and extremely chemical-resistant special bristle, smooth, colors available on request, diameter 0.20 – 0.60 mm. |
| Synthetic fibres | PE (Polyethylen) | Polyethylene, smooth, slotted or unslotted in X-profile, colors available on request, diameter 0.08 – 1.00 mm. |
| Synthetic fibres | CON (electrically conductive special bristle) | Electrically conductive special bristle (up to 5 × 10 kOhm/cm²) based on polyamide, smooth, black, temperature resistance up to 100 °C, Ø 0.13 mm. For large order volumes, the following bristle diameters are also available: 0.21 mm, 0.41 mm, 0.52 mm, and 0.64 mm. |
| Natural fibres | Chinese hog bristles (CHS) | Chinese hog bristles – medium-hard to hard, available in grey or black. |
| Natural fibres | ROS (horsehair – soft to medium-hard) | Horsehair – soft to medium-hard, black. |
| Natural fibres | ROS-GU (horsehair – hard) | Horsehair – hard, natural grey. |
| Natural fibres | MAH (Mane hair) | Mane hair – soft, natural grey or natural black. |
| Natural fibres | ZIE (goat hair) | Goat hair, exceptionally soft, suitable for sensitive surfaces. Classified as fine hair and processed by KULLEN exclusively in premium quality. |
| Plant fibre | FIB (Mexico fibre – medium-hard) | Mexico fibre – medium-hard |
| Plant fibre | FIB-GU (Mexico fibre – medium-hard to hard) | Mexico fibre – medium-hard to hard, grey |
| Plant fibre | SIS (sisal cord) | Sisal cord – cord diameter 2.8 to 5.0 mm |
| Fill Arrangement | ||
| Full-Density Filling | EA3 – Low Fill Density | Low fill density for uniform surface treatment. |
| Full-Density Filling | EA2 – Medium Fill Density | Medium fill density for uniform surface treatment. |
| Block Fill | F3 (Block fill, arrow-shaped) | Arrow-shaped |
| Block Fill | F2 (Block fill, diagonal) | Blocks arranged diagonally |
| Block Fill | F1 (Block fill, rectangular) | Block-shaped with gaps |
| Block Fill | F4 (Block fill, varying trim heights) | Staggered trim heights |
| Row Fill | 1 RH (Single-row) | 1 Row |
| Row Fill | 2 RH (Double-row) | 2 Rows |
| Row Fill | 3 RH (Triple-row) | 3 Rows |
Do you have questions about our products or are you looking for a different solution? Get in touch with us, we’re here to help.