Robust all-in-one solution

ST System Roller Brushes

Featuring steel or stainless-steel core bodies, ST system roller brushes offer maximum stability, a modular design and a long service life with minimal maintenance requirements.

Your benefits at a glance:

  • Core bodies made of steel or stainless steel for maximum stability
  • Available with WK1 solid shaft, WK2 tube body and WK4 core body variants
  • Suitable for peripheral speeds up to 15 m/s
  • Individual brush segments can be replaced without dismantling the complete roller
  • Wide range of fill materials, fill densities and fill patterns available

ST System Roller Brushes

Like all KULLEN roller brush systems, the ST system can be supplied as a complete roller brush with a steel or stainless steel core body (1.4301 / 1.4541). All available fill materials and fill arrangements can be implemented. Depending on the application, different core body constructions can be used including WK1 solid shafts, WK2 tube bodies and WK4 constructions. The design of the ST system roller brush allows peripheral speeds of up to 15 m/s, making it suitable for demanding industrial applications.

Fill Densities

EA1 – High fill density, EA2 – Standard fill density, EA3 – Low fill density

Fill Arrangements

In addition to total surface filling in three densities, we also manufacture roller brushes with a spiral arrangement (EB) and a linear arrangement (ED1).

Models

ST System Roller Brushes
Type KD (mm) d1 (mm) D min. (mm) D max. (mm) Rows KLG max. (mm) DXF
ST 2032 6 32 20 40 160 12 900 DXF
ST 2032 8 32 20 40 160 16 900 DXF
ST 203210 32 20 40 160 20 900 DXF
ST 2546 8 46 25 54 175 24 1200 DXF
ST 254612 46 25 54 175 24 1200 DXF
ST 254616 46 25 54 175 32 1200 DXF
ST 355810 58 35 66 275 20 1800 DXF
ST 355815 58 35 66 275 30 1800 DXF
ST 355818 58 35 66 275 36 1800 DXF
ST 406612 66 40 74 290 24 2000 DXF
ST 406617 66 40 74 290 34 2000 DXF
ST 406620 66 40 74 290 40 2000 DXF
ST 608612 86 60 94 305 24 2500 DXF
ST 608620 86 60 94 305 40 2500 DXF
ST 608630 86 60 94 305 60 2500 DXF
ST 7510214 102 75 110 320 28 3000* DXF
ST 7510218 102 75 110 320 36 3000* DXF
ST 7510222 102 75 110 320 44 3000* DXF
ST 10012718 127 100 135 345 36 3500* DXF
ST 10012724 127 100 135 345 48 3500* DXF
ST 10012728 127 100 135 345 56 3500* DXF

Bristle Material

The type of bristle material we use for your brushes depends on your application, your industry, and your product. Do you have questions about bristle material? Just contact us.

Brush construction
Type of fill material Fill material Properties
Synthetic fibres PP (Polypropylen) Polypropylene, acid-resistant, smooth or crimped, colors available on request. Diameter 0.10 – 1.00 mm.
Synthetic fibres PAP (special bristle for wet applications based on PP) Special bristle for wet applications based on polypropylene, offering longer service life due to acid resistance at high temperatures; available in smooth or crimped versions, colors on request, diameter 0.15 – 1.00 mm.
Synthetic fibres PBT (Polyester) Polyester, smooth or crimped, colors available on request, diameter 0.20 – 3.00 mm.
Synthetic fibres PA 6.6 (Polyamid) All polyamid qualities have strong recovery properties. PA 6.6 is the filament with the highest rigidity in dry application before PA 6.12 and PA 6. In case of wet use PA 6.12 ranks before PA 6.6 and PA 6 because of the lowest water absorption.
Synthetic fibres PA 6.12 (Polyamid) Polyamide, smooth or crimped, colors available on request, diameter 0.08 – 3.00 mm. All polyamide grades are characterized by excellent recovery properties. In wet applications, PA 6.12 offers the best stiffness due to its minimal water absorption.
Synthetic fibres KBL (PA-based, alkali- and temperature-resistant) Special bristle based on polyamide, highly resistant to alkalis even at high temperatures; available in smooth or crimped form, brown color, diameter 0.08 – 1.50 mm.
Synthetic fibres HCB (high-temperature and chemical-resistant) High-temperature resistant (up to max. 200 °C) and extremely chemical-resistant special bristle, smooth, colors available on request, diameter 0.20 – 0.60 mm.
Synthetic fibres PE (Polyethylen) Polyethylene, smooth, slotted or unslotted in X-profile, colors available on request, diameter 0.08 – 1.00 mm.
Synthetic fibres CON (electrically conductive special bristle) Electrically conductive special bristle (up to 5 × 10 kOhm/cm²) based on polyamide, smooth, black, temperature resistance up to 100 °C, Ø 0.13 mm. For large order volumes, the following bristle diameters are also available: 0.21 mm, 0.41 mm, 0.52 mm, and 0.64 mm.
ANDERLON abrasive brushes ANS PA6 (polyamide; embedded abrasive grain) Chinese hog bristles – medium-hard to hard, available in grey or black.
ANDERLON abrasive brushes ANS PA6.12 (polyamide; embedded abrasive grain) PA 6.12 offers excellent abrasion resistance and retains its stiffness in wet applications due to low water absorption.
ANDERLON abrasive brushes ANS KBL (Anderlon, alkali-resistant) Particularly suitable for applications involving alkaline solutions at elevated pH levels and temperatures.
ANDERLON abrasive brushes ANS-R (Round Brush with Silicon Carbide Grit) Round Brush with Silicon Carbide Grit
ANDERLON abrasive brushes ANS-F (Anderlon Flat Brush) ANDERLON Abrasive Bristles - ANS-F (Anderlon Flat Bristle): Flat bristles (1.20 x 2.50 mm) and (1.14 x 2.28 mm) for longer service life and shorter processing times; characterized by high rigidity and a high proportion of abrasive grains. These flat brushes are typically used with coarse grits, e.g., grit 80. We recommend that you contact our technical advisors so that we can suggest the appropriate fill material for your specific application.
ANDERLON abrasive brushes ANA (Anderlon round brush with aluminium oxide grit) At KULLEN, we precisely match the bristle diameter to the respective grit size: K1000, K800, K600, and K500 use a diameter of 0.25 mm; K600 and K500 also use diameters of 0.30 mm and 0.45 mm, respectively. K320 has a diameter of 0.55 mm, K240 has a diameter of 0.75 mm, and K180 has a diameter of 0.90 mm. K120 is available in diameters of 0.55 mm and 1.00 mm, while K80 is available in diameters of 1.00 mm and 1.27 mm. For coarser applications, we offer the K60 with diameters of 1.15 mm and 1.50 mm, as well as the K46 with a diameter of 1.60 mm. This ensures that every brush is optimally tailored to its specific application.
ANDERLON abrasive brushes AND (Anderlon with diamond grit) Diamond grit is extremely durable. Thanks to the diamond grit, this bristle offers maximum abrasiveness and longevity. It is therefore used specifically for machining carbide tools. We recommend that you contact our technical advisors so that we can suggest the right bristle material for your application.
ANDERLON abrasive brushes AND (Anderlon with diamond grit) Diamond grit is extremely durable. Thanks to the diamond grit, this bristle offers maximum abrasiveness and longevity. It is therefore used specifically for machining carbide tools. We recommend that you contact our technical advisors so that we can suggest the right bristle material for your application.
Wires BES (Bessemer steel wire) Wavy Bessemer steel wire, diameter from 0.06 to 0.25 mm
Wires PHB (phosphor bronze wire [CuSn]) Phosphor bronze wire (CuSn), smooth or wavy, diameter from 0.05 to 0.50 mm
Wires MES (brass wire (CuZn)) Brass wire (CuZn), smooth or crimped, diameter 0.06 – 0.56 mm.
Wires NSI (nickel silver wire [CuNi]) Nickel silver wire (CuNi), crimped, diameter 0.06 – 0.25 mm.
Wires STD (steel wire, natural hard) Steel wire, natural hard, crimped, diameter 0.06 – 0.80 mm.
Wires SUP (steel wire, hardened) Steel wire, hardened, smooth, diameter 0.30 – 1.20 mm.
Wires INOX (V2A wire, stainless and acid-resistant) Stainless and acid-resistant steel wire, smooth or crimped, material no. 1.4301 / 1.4310, diameter 0.08 – 1.00 mm.
Wires INOX (V4A wire, stainless and acid-resistant) Steel wire, stainless and acid-resistant, smooth or crimped, material no. 1.4401 / 1.4571, diameter 0.08 – 1.00 mm.
Wires RFH (corrosion-resistant specialty wire) Corrosion-resistant specialty wire, resistant to process steam up to 650 °C, available in smooth or crimped form, diameter 0.30 – 0.50 mm.
Wires TRD (special wire, high-temperature resistant) Special wire, high-temperature resistant up to 1350 °C, crimped, diameter 0.30 – 0.50 mm.
Wires SSD (steel wire) Natural hard, extra hard and tough, crimped, diameter 0.12 – 0.25 mm.
Wires ASD (steel wire, hardened, extra hard and tough) ASD (steel wire, hardened, extra hard and tough)
Wires LIT (steel wire, brass-coated, in cord construction) Steel wire, brass-coated, springy and tough, in cord construction, crimped, diameter 0.15 – 0.38 mm.
Wires LTE (steel wire, brass-coated, single wire) Steel wire, brass-coated, single wire, springy, crimped, diameter 0.15 – 0.38 mm.
AZD (steel wire, hardened, hard and tough) AZD (steel wire, hardened, hard and tough) Steel wire, hardened, hard and tough, smooth, diameter 0.35 – 0.80 mm.
Wires FLA (flat wire, hardened) Flat wire, hardened, smooth, 1.10 × 0.25 to 3.30 × 0.75 mm, or upon request.
Natural fibres Chinese hog bristles (CHS) Chinese hog bristles – medium-hard to hard, available in grey or black.
Natural fibres ROS (horsehair – soft to medium-hard) Horsehair – soft to medium-hard, black.
Natural fibres ROS-GU (horsehair – hard) Horsehair – hard, natural grey.
Natural fibres MAH (Mane hair) Mane hair – soft, natural grey or natural black.
Natural fibres ZIE (goat hair) Goat hair, exceptionally soft, suitable for sensitive surfaces. Classified as fine hair and processed by KULLEN exclusively in premium quality.
Plant fibre FIB (Mexico fibre – medium-hard) Mexico fibre – medium-hard
Plant fibre FIB-GU (Mexico fibre – medium-hard to hard) Mexico fibre – medium-hard to hard, grey
Plant fibre SIS (sisal cord) Sisal cord – cord diameter 2.8 to 5.0 mm
Fill Arrangement
Full-Density Filling EA3 – Low Fill Density Low fill density for uniform surface treatment.
Full-Density Filling EA2 – Medium Fill Density Medium fill density for uniform surface treatment.
Full-Density Filling F3 (Block fill, arrow-shaped) Arrow-shaped
Block Fill F2 (Block fill, diagonal) Blocks arranged diagonally
Block Fill Block Fill - F3 (arrow-shaped) Arrow-shaped
Block Fill F1 (Block fill, rectangular) Block-shaped with gaps
Block Fill F4 (Block fill, varying trim heights) Staggered trim heights
Spiral Filling EB1 – Left-Hand Spiral Left-hand spiral arrangement for conveying removed material.
Spiral Filling EB2 – Right-Hand Spiral Right-hand spiral arrangement.
Spiral Filling (ascending from the center to the left and right) From the center to the left and right
Core systems
Steel shaft Steel shaft (solid shaft) with or without keyway Steel; plastic-coated steel; rust-, acid-, and temperature-resistant steel, material numbers 1.4301 - 1.4571, 2.4879 (heat-resistant); Light metal: Where the specified brush speed and operating conditions require it, the bodies are electro-dynamically balanced to grade G 2.5 in accordance with ISO 1940
Tube body Tube body (with cone) - WK2 Tube body with cones for drive and bearing support. Possible body materials: steel; plastic-coated steel; rust-, acid-, and temperature-resistant steel, material numbers 1.4301 through 1.4571, 2.4879 (heat-resistant); light metal. Where the specified brush speed and operating conditions require it, the bodies are electro-dynamically balanced to grade G 2.5 per ISO 1940
Infinite Possibilities

Related products

ST System Segments with black fibres

ST System Segments

Your success is our success

Find the right solution

Do you have questions about our products or are you looking for a different solution? Get in touch with us, we’re here to help.