Modularity for maximum flexibility

ST System Segments

KULLEN ST System Segments enable fast and easy configuration of roller brushes. They can be mounted without tools and offer excellent resistance to chemicals, acids, alkalis and temperature-related stress.

Your benefits at a glance:

  • Segments made of glass fibre reinforced polypropylene for low weight, high durability and excellent chemical resistance
  • Seven core diameters and three fill densities available
  • Tool-free installation thanks to trapezoidal interlocking and clamping rings
  • Food-grade materials available for applications in the food processing industry
  • Wide choice of fill materials for virtually any industrial application

ST System segments

Our ST segments are manufactured from polypropylene with a very high glass fibre content. They are resistant to acids and alkalis, approved for food-contact applications and exceptionally lightweight. Seven diameter series are available with three trapezoidal tooth configurations, allowing three fill densities: light, medium and dense. This brush system can be supplied with all available fill materials.

Assembly is quick and straightforward. The segments are simply slid onto the roller body and secured from both sides using retaining rings. Standardized core dimensions provide important advantages such as competitive pricing and short delivery times. At the same time, a wide range of customization options remains available.

Inner diameters of segments and retaining rings can be adapted to smaller core diameters using reduction inserts. The standard segment length is 100 mm and retaining ring length is 25 mm, measured from trapezoid centre to trapezoid centre. Custom overall lengths can be achieved by shortening the core body and securing it using pins or smooth retaining rings.

Fill Densities
high fill density EA1, standard fill density EA2, low fill density EA3.

Fill Arrangements
In addition to total surface fillings in three densities, we also manufacture roller brushes with a spiral arrangement (EB) and a linear arrangement (ED1).

Models

ST System Segments
Type KD (mm) d1 (mm) D min. (mm) D max. (mm) Rows EA1 EA2 EA3 DXF
ST 2032 6 32 20 40 160 12 - - x DXF
ST 2032 8 32 20 40 160 16 - x - DXF
ST 203210 32 20 40 160 20 x - - DXF
ST 2546 8 46 25 54 175 24 - - x DXF
ST 254612 46 25 54 175 24 - x - DXF
ST 254616 46 25 54 175 32 x - - DXF
ST 355810 58 35 66 275 20 - - x DXF
ST 355815 58 35 66 275 30 - x - DXF
ST 355818 58 35 66 275 36 x - - DXF
ST 406612 66 40 74 290 24 - - x DXF
ST 406617 66 40 74 290 34 - x - DXF
ST 40662 66 40 74 290 40 x - - DXF
ST 608612 86 60 94 305 24 - - x DXF
ST 608620 86 60 94 305 40 - x - DXF
ST 608630 86 60 94 305 60 x - - DXF
ST 7510214 102 75 110 320 28 - - x DXF
ST 7510218 102 75 110 320 36 - x - DXF
ST 7510222 102 75 110 320 44 x - - DXF
ST 10012718 127 100 135 345 36 - - x DXF
ST 10012724 127 100 135 345 48 - x - DXF
ST 10012728 127 100 135 345 56 x - - DXF

Bristle Material

The type of bristle material we use for your brushes depends on your application, your industry, and your product. Do you have questions about bristle material? Just contact us.

Brush construction
Type of fill material Fill material Properties
Synthetic fibres PP (Polypropylen) Polypropylene, acid-resistant, smooth or crimped, colors available on request. Diameter 0.10 – 1.00 mm.
Synthetic fibres PAP (special bristle for wet applications based on PP) Special bristle for wet applications based on polypropylene, offering longer service life due to acid resistance at high temperatures; available in smooth or crimped versions, colors on request, diameter 0.15 – 1.00 mm.
Synthetic fibres PBT (Polyester) Polyester, smooth or crimped, colors available on request, diameter 0.20 – 3.00 mm.
Synthetic fibres PA 6.6 (Polyamid) All polyamid qualities have strong recovery properties. PA 6.6 is the filament with the highest rigidity in dry application before PA 6.12 and PA 6. In case of wet use PA 6.12 ranks before PA 6.6 and PA 6 because of the lowest water absorption.
Synthetic fibres PA 6.12 (Polyamid) Polyamide, smooth or crimped, colors available on request, diameter 0.08 – 3.00 mm. All polyamide grades are characterized by excellent recovery properties. In wet applications, PA 6.12 offers the best stiffness due to its minimal water absorption.
Synthetic fibres KBL (PA-based, alkali- and temperature-resistant) Special bristle based on polyamide, highly resistant to alkalis even at high temperatures; available in smooth or crimped form, brown color, diameter 0.08 – 1.50 mm.
Synthetic fibres HCB (high-temperature and chemical-resistant) High-temperature resistant (up to max. 200 °C) and extremely chemical-resistant special bristle, smooth, colors available on request, diameter 0.20 – 0.60 mm.
Synthetic fibres PE (Polyethylen) Polyethylene, smooth, slotted or unslotted in X-profile, colors available on request, diameter 0.08 – 1.00 mm.
Synthetic fibres CON (electrically conductive special bristle) Electrically conductive special bristle (up to 5 × 10 kOhm/cm²) based on polyamide, smooth, black, temperature resistance up to 100 °C, Ø 0.13 mm. For large order volumes, the following bristle diameters are also available: 0.21 mm, 0.41 mm, 0.52 mm, and 0.64 mm.
ANDERLON abrasive brushes ANS PA6 (polyamide; embedded abrasive grain) Chinese hog bristles – medium-hard to hard, available in grey or black.
ANDERLON abrasive brushes ANS PA6.12 (polyamide; embedded abrasive grain) PA 6.12 offers excellent abrasion resistance and retains its stiffness in wet applications due to low water absorption.
ANDERLON abrasive brushes ANS KBL (Anderlon, alkali-resistant) Particularly suitable for applications involving alkaline solutions at elevated pH levels and temperatures.
ANDERLON abrasive brushes ANS-R (Round Brush with Silicon Carbide Grit) Round Brush with Silicon Carbide Grit
ANDERLON abrasive brushes ANS-F (Anderlon Flat Brush) ANDERLON Abrasive Bristles - ANS-F (Anderlon Flat Bristle): Flat bristles (1.20 x 2.50 mm) and (1.14 x 2.28 mm) for longer service life and shorter processing times; characterized by high rigidity and a high proportion of abrasive grains. These flat brushes are typically used with coarse grits, e.g., grit 80. We recommend that you contact our technical advisors so that we can suggest the appropriate fill material for your specific application.
ANDERLON abrasive brushes ANA (Anderlon round brush with aluminium oxide grit) At KULLEN, we precisely match the bristle diameter to the respective grit size: K1000, K800, K600, and K500 use a diameter of 0.25 mm; K600 and K500 also use diameters of 0.30 mm and 0.45 mm, respectively. K320 has a diameter of 0.55 mm, K240 has a diameter of 0.75 mm, and K180 has a diameter of 0.90 mm. K120 is available in diameters of 0.55 mm and 1.00 mm, while K80 is available in diameters of 1.00 mm and 1.27 mm. For coarser applications, we offer the K60 with diameters of 1.15 mm and 1.50 mm, as well as the K46 with a diameter of 1.60 mm. This ensures that every brush is optimally tailored to its specific application.
ANDERLON abrasive brushes AND (Anderlon with diamond grit) Diamond grit is extremely durable. Thanks to the diamond grit, this bristle offers maximum abrasiveness and longevity. It is therefore used specifically for machining carbide tools. We recommend that you contact our technical advisors so that we can suggest the right bristle material for your application.
Wires BES (Bessemer steel wire) Wavy Bessemer steel wire, diameter from 0.06 to 0.25 mm
Wires PHB (phosphor bronze wire [CuSn]) Phosphor bronze wire (CuSn), smooth or wavy, diameter from 0.05 to 0.50 mm
Wires MES (brass wire (CuZn)) Brass wire (CuZn), smooth or crimped, diameter 0.06 – 0.56 mm.
Wires NSI (nickel silver wire [CuNi]) Nickel silver wire (CuNi), crimped, diameter 0.06 – 0.25 mm.
Wires STD (steel wire, natural hard) Steel wire, natural hard, crimped, diameter 0.06 – 0.80 mm.
Wires SUP (steel wire, hardened) Steel wire, hardened, smooth, diameter 0.30 – 1.20 mm.
Wires INOX (V2A wire, stainless and acid-resistant) Stainless and acid-resistant steel wire, smooth or crimped, material no. 1.4301 / 1.4310, diameter 0.08 – 1.00 mm.
Wires INOX (V4A wire, stainless and acid-resistant) Steel wire, stainless and acid-resistant, smooth or crimped, material no. 1.4401 / 1.4571, diameter 0.08 – 1.00 mm.
Wires RFH (corrosion-resistant specialty wire) Corrosion-resistant specialty wire, resistant to process steam up to 650 °C, available in smooth or crimped form, diameter 0.30 – 0.50 mm.
Wires TRD (special wire, high-temperature resistant) Special wire, high-temperature resistant up to 1350 °C, crimped, diameter 0.30 – 0.50 mm.
Wires SSD (steel wire) Natural hard, extra hard and tough, crimped, diameter 0.12 – 0.25 mm.
Wires ASD (steel wire, hardened, extra hard and tough) ASD (steel wire, hardened, extra hard and tough)
Wires LIT (steel wire, brass-coated, in cord construction) Steel wire, brass-coated, springy and tough, in cord construction, crimped, diameter 0.15 – 0.38 mm.
Wires LTE (steel wire, brass-coated, single wire) Steel wire, brass-coated, single wire, springy, crimped, diameter 0.15 – 0.38 mm.
Wires AZD (steel wire, hardened, hard and tough) Steel wire, hardened, hard and tough, smooth, diameter 0.35 – 0.80 mm.
Wires FLA (flat wire, hardened) Flat wire, hardened, smooth, 1.10 × 0.25 to 3.30 × 0.75 mm, or upon request.
Natural fibres Chinese hog bristles (CHS) Chinese hog bristles – medium-hard to hard, available in grey or black.
Natural fibres ROS (horsehair – soft to medium-hard) Horsehair – soft to medium-hard, black.
Natural fibres ROS-GU (horsehair – hard) Horsehair – hard, natural grey.
Natural fibres MAH (Mane hair) Mane hair – soft, natural grey or natural black.
Natural fibres ZIE (goat hair) Goat hair, exceptionally soft, suitable for sensitive surfaces. Classified as fine hair and processed by KULLEN exclusively in premium quality.
Plant fibre FIB (Mexico fibre – medium-hard) Mexico fibre – medium-hard
Plant fibre FIB-GU (Mexico fibre – medium-hard to hard) Mexico fibre – medium-hard to hard, grey
Plant fibre SIS (sisal cord) Sisal cord – cord diameter 2.8 to 5.0 mm
Fill Arrangement
Full-Density Filling EA3 – Low Fill Density Low fill density for uniform surface treatment.
Full-Density Filling EA2 – Medium Fill Density Medium fill density for uniform surface treatment.
Full-Density Filling F3 (Block fill, arrow-shaped) Arrow-shaped
Block Fill F2 (Block fill, diagonal) Blocks arranged diagonally
Block Fill Block Fill - F3 (Arrow-shaped) Arrow-shaped
Block Fill F1 (Block fill, rectangular) Block-shaped with gaps
Block Fill F4 (Block fill, varying trim heights) Staggered trim heights
Staggered trim heights EB1 – Left-Hand Spiral Left-hand spiral arrangement for conveying removed material.
Spiral Filling EB2 – Right-Hand Spiral Right-hand spiral arrangement.
Spiral Filling (ascending from the center to the left and right) From the center to the left and right
Infinite Possibilities

Related products

ST System Roller Brushes with orange core and different fill arangements

ST System Roller Brushes

Your success is our success

Find the right solution

Do you have questions about our products or are you looking for a different solution? Get in touch with us, we’re here to help.